Specification:
|
No. |
Model |
2000 |
|
1 |
No. of slitting |
5 knives (avaiable for extra) |
|
2 |
Minimum slitting between knives |
140mm (Less than 140mm, one knife can be used for middle slitting, 1 opening and 2 minimum slitting 70mm) |
|
3 |
Max.production speed |
180m/min |
|
4 |
Widest pass |
1650mm |
|
5 |
Longest paper |
1000mm |
|
6 |
Shortest paper passing |
200mm |
|
7 |
Main motor power |
4.0-4KW |
|
8 |
Dimension (l*w*h) |
2800*1400*1400mm |
|
9 |
Overall weight |
2000kg |
- Machine interface - PLC control, only input the cardboard to be cut, width, length, ridge type, one key order change, greatly reducing the waste of machine adjustment time.
- It is equipped with manual, automatic and long board modes.
- Leading edge suction paper feeding, accurate counting.
- Thin knife paper separation, automatic knife adjustment, automatic knife lifting and falling.
- Servo paper receiving, automatic separation and combination of stacking department, convenient operation, shooting and plate receiving function.
- One key confirmation and automatic gap adjustment of 3-layer, 5-layer and 7-layer paperboard.
- Input the length of the cardboard to be cut, and the baffle of the rear paper receiving machine will be adjusted automatically. The cut cardboard will not deviate or skew, and the four corners will form a 90 degree right angle.
- With preset count and dispatch function. The stacking part rises and falls automatically, which can connect with the height of the whole paperboard.
- The fiber comb is used to press the cut paperboard to make the paperboard neat and reach the predetermined number, and the paperboard is automatically transported to the rear of the console by belt.
- The number of sheets and belt rotation can be set in automatic mode.
